In commercial, medical, and educational settings, homogeneous flooring has become a popular choice for flooring due to its wear resistance, ease of cleaning, and overall aesthetic appeal. However, many people tend to overlook a core indicator—dimensional stability.
What Problems Occur After Installation If Dimensional Stability Does Not Meet Standards?
Dimensional stability, simply put, is the flooring’s ability to resist expansion and contraction in response to temperature and humidity changes, as well as daily use. If this indicator fails to meet standards, various problems will appear within weeks to months after installation, affecting not only the appearance but also increasing maintenance costs and even posing safety hazards:
(1)Bursting and Arching
When the ambient temperature rises (e.g., during hot summer days or when underfloor heating is on), the flooring will expand and deform. Without sufficient room for expansion and contraction, this can lead to bulging in the center and large-area arching, resulting in a noticeable hollow feeling when stepped on, severely impacting the walking experience.
(2) Seam Cracking and Separation
When the temperature drops and the environment becomes drier, the flooring will shrink, causing the seams between the planks to widen and create noticeable gaps. These gaps readily accumulate dust and dirt, making them difficult to clean and compromising the floor’s overall seal. This is especially unsuitable for areas with high hygiene requirements, such as hospitals and food processing plants.

(3) Edge Curling and Rolling:
Flooring with poor dimensional stability often expands and contracts unevenly, which can easily cause the edges or corners to curl up. This not only affects aesthetics but can also trip pedestrians. Furthermore, the edges and corners are more susceptible to damage from high heels, carts, and other heavy objects, shortening the flooring’s lifespan.
(4) Weld Cracking
Homogeneous flooring requires heat-fusion welds during installation. If dimensional stability is insufficient, repeated thermal expansion and contraction will stretch the welds, leading to cracking and detachment. This results in loss of waterproofing, allowing sewage and dust to seep into the subfloor, causing mold, bulging, and other secondary problems.
(5) Deterioration of Subfloor Flatness: After installation, uneven surfaces and undulations may appear, affecting both visual appeal and comfort underfoot. Uneven stress may also occur when furniture and equipment are installed later.

(6) Poor Adaptability and High Rework Rate: This type of flooring is unsuitable for underfloor heating and large-area installations, as deformation will be more pronounced. Furthermore, larger expansion joints and segmented cutting are required during installation, increasing material waste and increasing the likelihood of complaints and rework due to deformation, thus increasing time and labor costs.
What are the standards for dimensional stability of homogeneous flooring?
Currently, the core indicator for measuring the dimensional stability of homogeneous flooring in the industry is the heating dimensional change rate (the lower the value, the better the stability).
- EU Standard (EN 434): This is the entry-level standard for compliance in the EU, requiring a heating dimensional change rate of ≤0.4% for homogeneous flooring. Meeting this value qualifies it as a qualified product for EU export, but it only meets the basic needs of ordinary commercial scenarios, and its stability is at a medium level.
- Chinese National Standard (GB/T 11982.2-2015): This standard is followed for domestic commercial homogeneous flooring, classifying products into qualified and superior grades. Qualified grades meet the same requirements as the EU EN 434 standard, with a heating dimensional change rate ≤0.4%; superior grades have stricter requirements, with a heating dimensional change rate ≤0.15%, better handling scenarios with temperature differences and large-area installations, making it the preferred standard for mid-to-high-end projects in China.
- Factory Internal Control Standards: First-tier brand OEMs or high-end manufacturers will further tighten standards beyond national and European standards, forming internal control requirements to ensure product stability and suitability for high-standard scenarios such as underfloor heating, hospitals, and large shopping malls. These products typically achieve superior dimensional stability, reducing the risk of later deformation.
Additional Note: Many people mistakenly believe that “European standards are always stricter than national standards,” but this is not the case. EN 434 is merely the EU’s compliance threshold, while the requirements for superior-grade national standards are far higher than the European standard’s entry-level requirements. Furthermore, dimensional stability should be considered alongside auxiliary indicators, such as heating warping, to comprehensively assess the flooring’s overall stability.
How to Control the Dimensional Stability of Homogeneous Flooring During Production?
Dimensional stability is not “inherent,” but rather the result of end-to-end control from raw materials to finished product. The following are the core control points in production that help you quickly assess a manufacturer’s production capabilities and avoid inferior products.
(1) Formulation System Control: This is the core control aspect. It primarily involves optimizing raw material ratios, selecting appropriate resins, plasticizers, and heat stabilizers, and incorporating reinforcing materials to reduce the flooring’s coefficient of thermal expansion. This improves dimensional stability at the source and prevents deformation from expansion and contraction caused by an unreasonable formulation.
(2)Raw Material Screening Control: Strict screening of all raw materials required for production is conducted to remove impurities and substandard materials, ensuring the purity and consistency of raw materials. This prevents fluctuations in the finished product’s dimensional stability caused by inconsistent raw material quality.
(3)Mixing and Kneading Control: Standardized mixing and kneading processes ensure uniform mixing of resins, fillers, and additives, preventing powder agglomeration and uneven plasticization. This reduces hidden stress within the finished product and ensures consistent expansion and contraction throughout the flooring.
(4)Molding Process Control: This mainly focuses on the calendering or extrusion molding process, controlling key parameters such as plasticization degree, roller temperature, and molding speed to ensure uniform flooring thickness and balanced stress distribution. This prevents imbalances in the longitudinal and transverse expansion and contraction rates of the flooring due to improper molding processes.
(5)Cooling and Shaping Control: Utilizing appropriate cooling methods (such as air cooling or water cooling), a gradual, gradient cooling process allows the molecular chains within the flooring to loosen gradually, releasing internal stress generated during production. This avoids stress lock-up caused by rapid cooling, reducing the risk of later deformation.
(6)Aging and Curing Control: After the finished product comes off the production line, it undergoes a constant temperature and humidity curing process to further release internal stress and gradually set the dimensions. This prevents immediate cutting and rolling, which can lead to dimensional shrinkage and deformation later on.
(7)Structural Reinforcement Control: Some high-end products incorporate stabilizing structures such as composite fiberglass mesh layers during production to further restrain the lateral and longitudinal expansion and contraction of the flooring, improving dimensional stability and making it suitable for large areas and demanding applications such as underfloor heating.
In summary, the dimensional stability of homogeneous flooring is the “hidden core” that determines its installation performance and lifespan—if dimensions don’t meet standards, even the highest wear resistance and most attractive patterns will become a major source of rework. Understanding the core requirements of European and national standards and knowing the key control points in production are crucial for accurately procuring products that suit your needs and offer reliable durability.
Whether you are a purchaser, contractor, or end-user, focusing on dimensional stability is key to avoiding future problems and reducing maintenance costs. If you would like to learn more about selecting homogeneous flooring, please feel free to leave a message.